Frame Wall – frames selected walls or parts from the model according to predefined configuration.
First time in the project
The first time you click Frame Wall in a new project, you will get a message that the framing families are not loaded. You can load them directly from here:
Just click OK:
Framing families can be also loaded using Wall+ → Settings → Load Families:
Wall+ checks the status of selected walls. If there is something wrong with the walls, you will get a detailed report. In the image below, you can see possible report messages.
Let's solve the problem of wall type Int - 16+198+13:
To fix these kinds of problems, you usually need to go to Link Wall and check the situation:
Int - 16+198+13 has framing possibility disabled, so you just need to select the checkbox near the Frame column:
There is no problem if framing configuration in not assigned to the layer. You can assign it in the Link Wall dialog, or Wall+ will give you this option during the Frame Wall process:
Selected a sample framing configuration, which automatically comes with Wall+, and click OK: