E-HELPS

INTRODUCTION
Metal Framing Wall+ application for Autodesk® Revit® 1....allows you to quickly pre-define your wall framing configuration and frame walls in just a few...
Thu, 29 Aug, 2019 at 7:47 PM
FRAME WALL – ADD MAIN FRAME
Frame Wall Or: Frame Wall – frames selected walls or parts from the model according to predefined configuration. First time in the project ...
Sun, 6 Dec, 2020 at 6:04 PM
FRAME WALL – ADD SECONDARY FRAME, SIDING
Add Secondary Frame Add Secondary Frame – adds secondary frame to selected walls. Add Siding Add Siding – adds vertical, horizontal, or mixed ...
Thu, 29 Aug, 2019 at 8:46 PM
FRAME WALL – VALIDATE WALLS
Validate Walls Validate Walls – checks if the walls in the current project fit the predefined settings. Only validated walls should be framed. Pre...
Sun, 6 Dec, 2020 at 6:08 PM
LOAD FAMILIES
Load Families Load Families – choose the sample families to be loaded into the current project. Wall+M provides sample Metric and Imperial framing, detai...
Sat, 9 Jan, 2021 at 7:25 PM
LINK WALL
Link Wall Link Wall – makes a link between wall type from the project and the configuration. Choose the wall type you want to link and apply framing c...
Wed, 9 Dec, 2020 at 8:00 PM
FRAMING CONFIGURATION – Dialog
Framing Configuration Dialog or: Framing Configuration – defines all framing settings. It allows user to configure and save settings for al...
Sun, 6 Dec, 2020 at 6:32 PM
FRAMING CONFIGURATION – Configurations
Framing Configuration may be found in two locations: or: Configuration Type  – choose the type of framing you want to configure. The possible op...
Tue, 2 Feb, 2021 at 7:22 PM
FRAMING CONFIGURATION – Common Settings – Configuration Settings
Framing Configuration may be found in two locations: or: Configuration Settings Use for all Framing Elements (except Openings) – if ON, then...
Sun, 6 Dec, 2020 at 7:19 PM
FRAMING CONFIGURATION – Common Settings – Modify Configuration Settings
Framing Configuration may be found in two locations: or: Modify Configuration Settings Modify Configuration Settings – tab with advanced set...
Sun, 3 Jan, 2021 at 8:56 PM