AGACAD

1.  Make sure you have Rebar Shapes in your model. They should be visible in your Project Browser: If you don't have them, load them from Libra...

Links Rebar Configuration with selected wall layer. Choose which configuration should be used on each wall layer. 1. Create Rebar Configuration. 2. Sel...

The Create Rebar command creates reinforcement for selected walls if Rebar Configs have already been created and assigned to the Wall through the Wall Link....

Rebar cover reference is a parameter in all rebar tabs. It allows users to change the plane in which the position of the rebar is calculated. Below is seen...

Update Rebar will delete reinforcement created with Wall Reinforcement tool and insert reinforcement by using the configurations used on this particular wal...

This command will delete all reinforcement created with the Wall Reinforcement tool. Then it will read information in Wall Link and use the selected configu...

    1. Select Modify Rebar.     2. Select rebar. Configuration window of this reinforcement will open. You can see name of the configuration at the upper-l...

Delete Rebar - deletes all reinforcement hosted in the wall. Delete WR Rebar - deletes reinforcement created by Wall reinforcement tool.

Path to configuration files. You may predefine personal or shared/company path for reinforcement configurations. Prepare your configurations, use them for ...

Modify Configuration Settings  Minimal Cover - define cover distance around openings for edge bars, if they intersect openings. Minimal Rebar Leng...