E-helps

BR Workflow
1.  Make sure you have Rebar Shapes in your model. They should be visible in your Project Browser: If you don't have them, load them from Libr...
Thu, 13 Aug, 2020 at 9:38 AM
Rebar configurations
First you need to select the type of beam section you want to work with. Then Create configuration by using Save As from existing configuration. Af...
Wed, 12 Aug, 2020 at 8:36 AM
Rebar configurations – Cover settings
Each beam section might have different settings for cover. The image will show what the settings are for. Here is an example of what you might see for a giv...
Tue, 10 Mar, 2020 at 3:54 PM
Rebar configurations – Main rebar
First you must define how many bars you want to have at the bottom, top, center, etc. Then you go to the Stirrups tab and define which Main rebar should be ...
Tue, 10 Mar, 2020 at 3:58 PM
Rebar configurations – Stirrups
After number and position of Main rebar are defined, it's time to set up stirrups.  In the Stirrups rebar window there are 2 tabs: Layout tab – d...
Tue, 10 Mar, 2020 at 4:01 PM
Modify Rebar
Change reinforcement settings only for selected Structural Framing element. Select Modify Rebar. Select rebar. Configuration window for selected reinf...
Thu, 13 Aug, 2020 at 9:27 AM
Update rebar
Update Rebar will delete reinforcement that was created with the Beam Reinforcement tool and insert reinforcement by using the configurations used on this i...
Tue, 10 Mar, 2020 at 12:43 PM
Update by Beam Link
This command will delete all reinforcement created with the Beam Reinforcement tool. Then it will read information in Beam Link and use the selected configu...
Tue, 10 Mar, 2020 at 12:43 PM
Delete Rebar
Deletes all reinforcement hosted in the Structural Framing element.
Tue, 10 Mar, 2020 at 12:44 PM
Beam Link
This command links Rebar Configuration with selected Structural Framing Type. Choose which configuration should be used on each Type. 1. Create Rebar Co...
Thu, 13 Aug, 2020 at 9:14 AM